What is the Best makita stainless steel cutting blades Available in 2021

In this article we will take a look at some of the best chosen makita stainless steel cutting blades . We would recommend using Makita 792555-A Portable Band Saw Blade, 44-7/8″ x 1/2″ 24TPI, Bi-Metal, Stainless Steel as it is one of the best products currently available in the market

Top 7 best makita stainless steel cutting blades review:

Makita 792555-A Portable Band Saw Blade, 44-7/8" x 1/2" 24TPI, Bi-Metal, Stainless Steel

 in stock
2 new from $17.50
Free shipping
Amazon.com
as of September 27, 2021 8:05 am

Features

  • BI-Metal construction for up to 3x longer life than carbon blades
  • 24 TPI configuration ideal for use cutting materials up to 1/8" thick
  • Makes clean, quick cuts in a variety of ferrous and non ferrous metals
  • Ideal for cutting a wide variety of materials including, rebar, pipe, all thread and channel
  • For use with Makita corded and cordless portable band saws as well as competitor 44-7/8" portable band saws

Delta Diamond Extreme Metal Diamond Blade 4.5-inch Heavy Duty All-Purpose Cutting/Grinding of Rebar Angle Iron Sheet Metal Stainless Steel (4-1/2")

 in stock
1 used from $19.34
Free shipping
Amazon.com
as of September 27, 2021 8:05 am

Features

  • Made with top-quality GE Superabrasive diamond, this blade is excellent for cutting all ferrous and non-ferrous metals. It is guaranteed to deliver a better combination of cutting speed and tool life, with a lower cost per cut than any other blade on the market.
  • It will last over 100X longer than abrasive wheels and save tremendous amounts of down time due to fewer blade changes. It also cuts with a constant, even cutting depth. Produces far fewer sparks compared to traditional blades.
  • Dimensions are 4 1/2" diameter X .100 thick with a 7/8" arbor hole. Also included is a 5/8" bushing for adapting to just about any hand-held grinder or trim saw.
  • The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting. The maximum safe operating speed is 12,500 RPM.
  • Because this is a top-quality product it is backed with a 100% lifetime warranty that also includes free return shipping. If it ever breaks, warps, cracks or shows any sign of a material defect (being used for its intended purpose) it will be replaced free of charge!

Makita 10 Pack - 4.5" Cut Off Wheel For 4.5" Grinders - Flush Cutting For Stainless Steel & Metal - 4-1/2" x .045 x 7/8-Inch

 in stock
Amazon.com
as of September 27, 2021 8:05 am

Features

  • ✅ 10 MAKITA 4-1/2” Depressed Type 27 Cut Off Wheels for Flush Cuts on Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ FLUSH CUTS SMOOTHLY, Easily & Quickly through All Hard to Reach Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ DESIGNED for Hard-to-Reach areas and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material

Makita 5 Pack - 4.5" Cut Off Wheels For Grinders - Flush Cutting For Stainless Steel & Metal - 4-1/2" x .045 x 7/8-Inch

 in stock
Amazon.com
as of September 27, 2021 8:05 am

Features

  • ✅ 5 MAKITA 4-1/2” Depressed Type 27 Cut Off Wheels for Flush Cuts on Stainless Steel & Metal | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ FLUSH CUTS SMOOTHLY, Easily & Quickly through All Stainless Steel & Metal parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ DESIGNED for Hard-to-Reach areas and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material

ZUZZEE 9inch 8TPI Unpainted Stainless Steel Reciprocating Saw Blade for Frozen Meat Bone Cutting Wood Pruning (5 Pack)

 in stock
Amazon.com
as of September 27, 2021 8:05 am

Features

  • 【Feature】It contains 5pcs 8TPI unpainted stainless steel reciprocating saw blades. Two different size saw blades to meet your various needs. It's safe for cutting food and also it's easy to maintain, clean
  • 【Main Use】Stainless steel reciprocating saw blade, Ideal for cutting frozen food, deer meat, hamburger meat, beef, sheep, fish, cured ham, turkey legs, bone and more
  • 【Compatibility】Compatible with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Ryobi, Black & Decker, Bosch, Hitachi, and so on
  • 【Durability】The ZUZZEE sawzall blades with a Unpainted stainless steel body, highly rust resistant. Durable, ultra-hard cutting edge with five times longer service life than standard blades
  • 【SAVE TIME】The aggressive stainless steel tooth profile makes it easy into any corner for cutting job. meat processing can save a lot of money and time

Makita 5 Pack - 4 Inch Cut Off Wheels For 4" Grinders - Aggressive Cutting For Metal & Stainless Steel - 4" x .045" x 5/8"

 in stock
Amazon.com
as of September 27, 2021 8:05 am

Features

  • ✅ 5 Makita Premium 4” Flat Type 1 Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-Inch x .045-Inch x 5/8-Inch | Optimized for Makita 4 Inch Angle Grinders and compatible with All 4” Angle Grinders with standard M10 x 1.25" Spindle Thread
  • ✅ Cut 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ Quickly & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ Avoid Wheel Shatter & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ Designed for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material

7-1/4 X 70 FERROUS ULTRAFINE

 in stock
20 new from $28.99
Free shipping
Amazon.com
as of September 27, 2021 8:05 am

Features

  • The product is 7-1/4x70T Diablo Blade
  • Easy to use
  • The product is manufactured in Italy
  • For 7-1/4-Inch Circular Saws. 1/8-Inch or less Thin Steel thickness Ultrafine cut, 5600+ RPM, Very Thin Steel 18 ga or thinner, 5/8-Inch arbor.
  • Features Freud's Exclusive TiCo Hi-Density Carbide designed specifically for metal cutting applications.

Makita 3 Multi-Piece - 4.5” Turbo Diamond & Abrasive Blade Set For 4.5”+ Grinders & Saws - Ultra-Fast Cutting For Concrete, Masonry & Metal

 in stock
Amazon.com
as of September 27, 2021 8:05 am

Features

  • ✅ Multi-Piece Set includes 1 MASONRY Blade + 2 METAL Cut Off Wheels | 1 Premium Makita 4.5” Turbo Diamond Blade For FAST 1.25” Depth Concrete, Cinder Block & Brick Cutting + 2 Makita 4.5” Abrasive Metal & Stainless Steel Cut Off Wheels | 4.5” x 7/8” Arbor, Optimized for Makita 4.5”-9” Angle Grinders or Saws and compatible with All 4.5”-9” Angle Grinders or Saws
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry
  • ✅ QUICKLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds with Makita’s proprietary bond that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear

Makita 10 Pack - 4.5" Cut Off Wheels For Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2" x .045 x 7/8-Inch

 in stock
Amazon.com
as of September 27, 2021 8:05 am

Features

  • ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders
  • ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material

5 Things You need to consider when choosing the makita stainless steel cutting blades in 2021

There are some things you should consider when buying a makita stainless steel cutting blades. We spent 22 hours researching the most important things you should consider when buying a makita stainless steel cutting blades. So should we start with the list of things you should consider?

1. Budget and price matching

Make a list of the things you want in your makita stainless steel cutting blades and the price you are willing to pay for it. So try to look for a product in that price range and choose the one that appeals to you the most. One tip we would like to give you is: don’t settle for a cheaper product if it doesn’t even have a function you need.

Most makita stainless steel cutting bladess fall within the price range of $ 17.5 to $ 28.99. Therefore, if budget is not a problem and you want the best product for your needs, we advise you to choose the Makita 792555-A Portable Band Saw Blade, 44-7/8″ x 1/2″ 24TPI, Bi-Metal, Stainless Steel.

If you want something medium range, choose Makita 5 Pack – 4.5″ Cut Off Wheels For Grinders – Flush Cutting For Stainless Steel & Metal – 4-1/2″ x .045 x 7/8-Inch. If you have a very low budget, you can choose the one that is the 7-1/4 X 70 FERROUS ULTRAFINE

2. Does it have all the features you need?

Most importantly, the makita stainless steel cutting blades you are purchasing should have all the features you are looking for. In case you don’t even have one, don’t buy! We are saying this because you will not be able to use it for that purpose. If you are a person without budget problems, I would suggest you to choose the best model which is 7-1/4 X 70 FERROUS ULTRAFINE

3. The brand

Buying the makita stainless steel cutting blades from a reputable brand can actually make sense. Not only will it be better than others in terms of “build quality”, but it will also have some extra features, better customer support. Famous brands have multiple service centers across the country, so if you have any problems you can simply take your makita stainless steel cutting blades to one of their service centers.

4. Warranty Matters!

When you buy a makita stainless steel cutting blades from a well-known brand, you will get a guarantee. Low-cost products also come with warranties, but the claim process could be tougher. That’s why I always suggest you buy the product from a reputed brand and the one that comes under warranty. It will save you from repair costs in the future. On average, around 21% of people end up paying 40% of the product price for the service! You can save on service costs if the product is under warranty!

5. Check out our website

On our website we have experts in all categories and no matter what the product is, we have a better review or list about it. The products on our list are based on expert picks, advice and hours of research. That’s why when you buy something that’s listed on our best list, you won’t regret it. However, there is a possibility that we may not have covered the product you might be interested in, but if you come across something like this, please let us know via comments or contact us.

FAQs

What is the best makita stainless steel cutting blades?

The best makita stainless steel cutting blades is the one that has all the features that meet your needs. I think the best is Makita 792555-A Portable Band Saw Blade, 44-7/8″ x 1/2″ 24TPI, Bi-Metal, Stainless Steel

Are there any good deals on makita stainless steel cutting blades?

In the offline market, you won’t find many offers. However, I have chosen the best makita stainless steel cutting blades and have added links to Amazon which has deals and deals running on a regular basis.

What is the cheapest makita stainless steel cutting blades?

Although most of the cheaper makita stainless steel cutting blades do not have many features, but if you are looking for the best one at a low cost, my best bet would be on 7-1/4 X 70 FERROUS ULTRAFINE

Where can I buy the makita stainless steel cutting blades?

There are several places where you can buy it, but in my opinion, when it comes to the online marketplace, I wouldn’t recommend anything other than Amazon. It’s because their service is great!

Why should you trust our website?

We have been in the review business for more than 15 years and our motive is to help people buy the top rated products at the best price. We went through 22 to help you find the best makita stainless steel cutting blades

The verdict

We hope you liked the makita stainless steel cutting bladess that we have listed in our best list. If it was helpful, bookmark our site and share it with people you know whenever they intend to buy something.
To conclude this guide,

  • If you are looking for the best makita stainless steel cutting blades: you should consider the idea of Makita 792555-A Portable Band Saw Blade, 44-7/8″ x 1/2″ 24TPI, Bi-Metal, Stainless Steel
  • If you want the one that has similar characteristics to the best, then you should consider Delta Diamond Extreme Metal Diamond Blade 4.5-inch Heavy Duty All-Purpose Cutting/Grinding of Rebar Angle Iron Sheet Metal Stainless Steel (4-1/2″)
  • If you want a makita stainless steel cutting blades that is “value for money”, choose Makita 10 Pack – 4.5″ Cut Off Wheel For 4.5″ Grinders – Flush Cutting For Stainless Steel & Metal – 4-1/2″ x .045 x 7/8-Inch
  • If you want the cheapest makita stainless steel cutting blades, then 7-1/4 X 70 FERROUS ULTRAFINE should be the best for your needs!</
  • Updated: September 27, 2021 — 8:05 am